Balometer


Balometer
[printName]
[printName]
[printName]
[printName]
[printName]
[printName]
[printName]


Galeri için tıklayınız

Air Flow Hood or Balometer is designed to measure volumetric air flow from diffusers, grilles and registers. The Air Flow Hood maintains a running average of measurements in the desired units and provides the ability to manually record measurements with the manometer on a given time period. The highly accurate digital manometer has an auto-zero feature and will auto-zero at user-defined intervals. The digital manometer easily mounts to the flow hood with its magnet back-plate. Break down is very quick and easy as tools are not required. In addition to these features, the unit will alert you when its battery is running low in order to avoid recording inaccurate measurements. This lightweight flow hood is durable and easily stores into an included travel case.

Service: Air.
Volume Flow Rate Units: CFM, l/s, m³/hr.
Volume Flow Ranges: Supply: CFM: 41 to 1176; l/s: 19 to 555; m³/hr: 69 to 2000. Exhaust: CFM: 45 to 1176; l/s: 21 to 555; m³/hr: 76 to 2000.
Accuracy @ 20°C (68°F): Supply: ±3% of reading ±9 CFM (±4 l/s, 14 m³/hr) when flow >85 CFM (40 l/s). Exhaust: ±3% of reading ±9 CFM (±4 l/s, 14 m³/hr) when flow >85 CFM (40 l/s).
Span Stability v. Temperature: Better than 0.1% of range in use per 2°F (1°C).
Zero System Accuracy: ±1 count (±0.05 Pascal typical; ±0.0002" w.c.).
Temperature Limits: 32 to 123°F (0 to 50°C).
Thermal Effect: ±0.1% of range in user per 2°F (1°C).
Zero Drift: Negligible due to auto zero system. When auto zero set at 30 second intervals (2 minute warm up).
Orientation Effect: Any 45 degree change 0.0004" w.c. (0.1 Pascal) typical.
System Air Leak: 0.366 in³/hr (0.1 ml/min) @ 20" w.c. (5 kPa) typical.
Maximum Differential Pressure: 60" w.c. (15 kPa).
Storage Temperature: 23 to 122°F (-5 to 50°C).
Auto Ranging Display: 0.375" high digits.
Resolution: 1 CFM, 0.1 l/s, 1 m³/hr.
Output: RS-232 serial interface (baud rate 9600).
Memory Capability: 2500 readings in any engineering unit.
Power Source: Rechargeable 8.4 V 120 mAh (optional 9V may be used in place of rechargeable).
Dimensions: 30" x 24" x 24" (965 x 610 x 610 mm). Hood only: 2' x 2' (600 mm x 600 mm).
Weight: 8.8 lb (4 kg).
Agency Approvals: CE.

SAH Katalog SAH Katalog

Offer Request